The Zeitler EZ-SYSTEM-X is a unique blowing device that has been specially developed for the efficient blowing of steel ropes and cable pull lines into conduits.

The EZ-SYSTEM-X rope blower is characterized by an axial sealing that ensures reliable performance, very easy fastening in the pipe and a safe operating. It is the only blowing device for ropes that covers all pipe dimensions from 60 to 150 mm.

This device is suitable for pipes with an internal diameter of 60 to 150 mm and can be adjusted to all pipe internal diameters in this range in only 2 minutes.

This blowing device can blow in pilot ropes, winch ropes, cable pull lines and cords with a diameter of 1 to 8 mm.

The EZ-SYSTEM-X rope blower is operated with a compressor, allowing blowing lengths of over 3,000 meters to be achieved.

Thanks to its axial sealing, the EZ-SYSTEM-X rope blower offers significantly higher work safety.
In the event of an overload, the device is pushed out by the increased air pressure and the air can immediately escape to the side. The fastening still remains in the pipe and EZ-SYSTEM-X cannot be thrown out.

Yes, the EZ-SYSTEM-X Rope Blower can be used with occupied pipes in combination with the EZ-SPEEDY-XL Cable Pusher.

The simple handling and the possibility of adapting the device to different inner pipe diameters from 60 to 150 mm in just 2 minutes lead to considerable time and cost savings.
Just one device that can be used for all dimensions.

Yes, the device is designed ecologically, service-friendly and sustainably.
It is made of durable materials such as steel and aluminum, as well as high-quality synthetics.
In addition, the EZ-SYSTEM-X has an open rope guide that allows the rope/cord to be removed after the blowing process. Thus, the rope/cord does not have to be cut and can be reused several times.

Despite its powerful functionality, the EZ-SYSTEM-X is compact in design, handy and easy to transport. It fits easily into any car trunk and offers excellent accessibility, even in confined spaces.

The EZ-SYSTEM-X rope blower is available in two versions:

• EZ-SYSTEM-X Standard
• EZ-SYSTEM-X +PLUS (Rope Blower including EZ-SPEEDY-XL Cable Pusher)

• Versatility: Our rope blowing device can be used for ropes and cords with a diameter of 1 to 8 mm and for pipes with an internal diameter of 60 to 150 mm. In just 2 minutes, the device can be converted to other dimensions.
• Axial sealing: This feature of the device ensures reliable performance and very easy installation in the pipe, which guarantees safe working.
• Material quality: Made from high-quality materials such as stainless steel and aluminum, it offers a robust, ecological and sustainable construction.
• Open rope guide: This characteristic allows the rope or cord to be removed from the device without cutting it. Thus the cord can be reused several times.
• Powerful: The EZ-SYSTEM-X rope blower enables a blowing length of several hundred meters in a matter of seconds with a standard site compressor.
• Increased work safety: In the event of an overload, the blowing device is pushed out by the higher air pressure, allowing the air to escape to the side. Compared to conventional pipe plugs, the device remains clamped in the pipe and is not thrown out.
• Easy handling: Just a few turns of the handle are all it takes to easily and conveniently attach the device to the pipes and seal them.
• Compact design: Despite its powerful functionality, the rope blower is compact in design, handy and easy to transport, making it particularly accessible in tight spaces.