The brass version is suitable exclusively for blowing in cords and ropes.
The hardened steel rope guides are specifically designed for blowing in steel ropes.

To ensure optimum performance of the pull line blower when using the head piece with side channel, make sure that the front attachment matches the pipe size and that the rope guide used corresponds to the diameter of the cord or rope.

Yes, the attachment can be mounted directly on the device or on the air hose.

Yes, the head pieces compatible with the EZ300—Ø 140 mm and Ø 200 mm—are available as accessories and can be ordered at any time.

The head pieces with side channel are available for the EZ300 in 140 mm and 200 mm sizes.

This attachment allows the cord to be easily removed after the blowing process without having to cut it.
This offers clear advantages in use and also results in cost savings, as the cord can be reused.
In addition, the side-channel attachments, when used in combination with the separable, hardened rope guides, can also be used for blowing steel cables.

Yes, the EZ300 pull line blower can also be used with flexible pipes or corrugated pipes.

Yes, it is provided with the application of the shuttle.

The EZ300 pull line blower enables the pipes to be cleaned, water to be ejected, calibrated and the cord to be pulled in in a single operation using the blow-in shuttle.

Only if the pipe is not more than 50% full.
Additional accessories, such as a cone or a piece of pipe together with a foam insert, are required.

Yes, the cord is fed in from the outside and can therefore be reused.

The cone is perfect for use with poor pipe access or irregular pipe ends

The EZ300 pull line blower is equipped with the standard accessories for pipes with an internal diameter of Ø 50 to 200 mm.
For an extended application, an additional foam adapter is available, which enables use for pipes with a diameter of up to Ø 250 mm.