EZ300 +PLUS Pull Line Blower with side channel
The EZ300 Pull Line Blower requires no electrical connection, as it features a powerful 2-stroke engine that can blow in or aspirate the pulling cord independently of power supply.
The device is used for network construction in civil engineering, ground work, roads, tunnels, bridges, snow cannons and cable car construction to install cables in pipes with an inner diameter of Ø 25 to 200 mm wire.
Water, loose dirt, or small particles are expelled in the same process.
Thanks to the integrated side channel, the EZ100 can also be used to blow in steel ropes, in addition to conventional pulling ropes. Furthermore, ropes and lines with diameters of up to 8 mm can be removed from the device without cutting them, allowing previously used ropes and lines to be reused, reducing material consumption and operating costs.
Europa + USA: 24 – 48 H
Canada, UAE, Asien: 48 – 72 H
Tarif N°: 8479.1020 / Origin: Swiss
Description
Case with STANDARD Equipment
EZ300 Pull Line Blower
2 rolls of cable Pull Line ø 1 mm
(tensile strength ca. 24 kg, roll ca. 900 m)
5 shuttle complete set
dimensions free of choice (ø 26-200 mm)
1 box with assembly material for shuttles
1 box with parachutes:
1 for conduit (Internal) ø 60 to 100 mm
1 for conduit (Internal) ø 100 to 150 mm
1 head piece ø 140 mm with side channel
1 head piece ø 200 mm with side channel
1 brass rope guide – dimension freely selectable
for ropes ø 1, 2, 3, 4, 5, 6, 7, or 8 mm
1 suction unit
1 blowing unit
1 fuel can 0.5 liter (empty)
1 air hose 2 m
1 instruction manual
