Efficient, fast, and completely compressor-free – your key to rapid cable installation
The EZ100 Pull Line Blower is more than just a tool – it is the revolutionary solution, specifically designed for cable network installers, as well as for laymen looking to work more efficiently and save time in cable laying.
This cord blowing device is suitable for standard conduits with an internal diameter of 25 to 160 mm / 1″ to 6″ inches and can also be optimally used for corrugated conduits.
With this powerful blowing device, it is possible to blow in a pull line with a diameter of up to 5 mm and a tensile strength of up to 800 kg over several thousand meters (record length 3,280 m) – without the need for a compressor.
The new EZ100 version with integrated side channel expands the device’s range of applications and also enables the blowing of steel ropes up to 8 mm. After the blowing process, ropes or pull lines can be easily removed through the side channel without the need for cutting, allowing them to be reused.
The EZ100 Pull Line Blower significantly simplifies the cable installation process, resulting in substantial time and cost savings for your projects.
Thanks to its compact dimensions and lightweight design, this cord blowing technology is not only easy to handle and transport but also fits effortlessly into any car boot and is always ready for use. Its excellent accessibility, even in the tightest spaces, combined with straightforward operation, makes this device the ideal assistant.
EZ100 with pull line supply
- Blowing of cable pull line without compressor
- Suitable for blowing cords Ø 1mm to 5mm
EZ100 with side channel
- Blowing in pull lines and steel ropes without a compressor
- Suitable for pull lines and ropes from Ø 1 mm to 8 mm
- Allows the pull line to be reused
EZ100 General
- For standard cable conduits from Ø 25 to 150 mm / 1″ to 6″
- Ideally suited for installations in the ground/road, tunnel and bridge construction
- For tube diffusers, cable conduits or occupied ducts
- Cleaning, ejecting water, calibrating and pulling in the cord in a single operation
- Powerful for pulling-in problems, such as crushed tubes
- Significant time and cost savings during cable installation
- Easy operation and handling
- Light and compact
- Quickly ready for use
- Fast line feeding over 1’000m (current record 3280m)
- Excellent accessibility, even in confined spaces
- Fits in any car boot
- Available with 230V/50Hz or 115V/60Hz power source
- Available in two versions: Standard and Plus
EZ100 with pull line supply
Standard equipment:
- 1 x EZ100 Pull Line Blower (230V/50Hz or 115V/60Hz)
- 1 x Head piece 140mm with pull line supply
- 2 x Rolls of Cable Pull Line ca. 900m, tensile strength 24kg
- 2x Replacement foam collars ø 140 mm
- 5 x Shuttle complete sets
– Dimensions free of choice from ø 50-150 mm / 2″ – 6″ - 1 x Box with assembly material for shuttle
- 1 x Instruction manual
Extra with + PLUS Equipment:
- 1 x Adapter for small conduits ø 25-50 mm / 1″-2″
- 1 x Foam adapter (ø 170 mm / 6 ¾”)
- 1 x Parachute for conduits ø 30 to 60 mm / 1″ to 2 ½”
- 1 x Parachute for conduit ø 60 to 100 mm / 2 ½” to 4″
- 1 x Parachute for conduit ø 100 to 150 mm / 4″ to 6″
EZ100 with side channel
Standard equipment:
- 1 x EZ100 Pull Line Blower (230V/50Hz or 115V/60Hz)
- 1 x Head piece 140mm with side channel
- 1 x Rope guide of brass 6mm
- 2x Replacement foam collars with slot ø 140 mm
- 5 x Shuttle complete sets
– Dimensions free of choice from ø 50-150 mm / 2″ – 6″ - 1 x Box with assembly material for shuttle
- 1 x Instruction manual
Extra with + PLUS Equipment:
- 1 x Adapter for small conduits ø 25-50 mm / 1″-2″
- 1 x Foam adapter (ø 170 mm / 6 ¾”)
- 1 x Parachute for conduits ø 30 to 60 mm / 1″ to 2 ½”
- 1 x Parachute for conduit ø 60 to 100 mm / 2 ½” to 4″
- 1 x Parachute for conduit ø 100 to 150 mm / 4″ to 6″
Maximum air flow rate:
Blowing/suction mode 4 m³/min
Generator output:
min. 2000 W
Thermal safety switch
Yes
Protection class:
IP20
Weight of device:
3.1 kg / 3.3 kg
Weight of device with carry-case:
approx. 10kg
Dimensions of carry-case:
60x40x25cm
EZ100 with +Plus equipment
The EZ100 is also available in a Plus version.
Thanks to its extended accessory package, the EZ100 Plus offers an even wider range of applications, providing greater flexibility and versatility for everyday installation work.
Video presentation with EZ100 Pull Line Blower
We present you our video about the innovative application of the EZ100 Pull Line Blower from Zeitler!
Find out more about the versatile functions and applications of the EZ100 cord blowing device and discover how it can optimise your installation processes. Watch the video now and see the EZ100 Pull Line Blower in action!
Blowing in pull cord into electrical conduits with the EZ100
In our current video, we demonstrate the impressive application of the EZ100 pull line blower for blowing cords into cable ducts.
See for yourself how efficient the EZ100 is and immerse yourself in the world of exceptional cable laying technology. Experience how this powerful device can optimize your work process!
FAQ EZ100 Pull Line Blower
The brass version is suitable exclusively for blowing in cords and ropes.
The hardened steel rope guides are specifically designed for blowing in steel ropes.
A new version of the EZ100 is now available, so the front panel with side channel can be ordered along with a new unit.
Retrofitting is not possible.
This attachment allows the cord to be easily removed after the blowing process without having to cut it.
This offers clear advantages in use and also results in cost savings, as the cord can be reused.
In addition, the side-channel attachments, when used in combination with the separable, hardened rope guides, can also be used for blowing steel cables.
Yes, the EZ100 pull line blower can also be used with flexible pipes or corrugated pipes.
Yes, it is provided with the application of the shuttle.
The EZ100 pull line blower enables the pipes to be cleaned, water to be ejected, calibrated and the cord to be pulled in in a single operation using the blow-in shuttle.
The cone is perfectly suited for use with poor pipe access or irregular pipe ends.
Yes, the cord is fed in from the outside and can therefore be reused.
Yes, the extension hose can be used with the EZ100 pull line blower. You will need the optional interchangeable front part and the desired extension hose.
Only if the pipe is not more than 50% full.
Additional accessories, such as a cone or a piece of pipe together with a foam insert, are required.
The standard version of the EZ100 pull line blower is suitable for pipes with an internal diameter of Ø 50 to 150 mm.
With the help of the special adapter for small pipes, which is included with the Plus equipment, the device can be used with pipes with an internal diameter from Ø 25 mm.
