EZ15 Pull Line Blower
The EZ15 Pull Line Blower from Zeitler is a special development for inserting a cable pull line into pipes up to 500 meters long. The device can be used with micro and flexible pipes with an internal diameter from 4 to 20 mm. A standard commercial compressor that generates air pressure of around 8 bar and approx. 200 – 300 liters of air is sufficient for operation.
Within just a few seconds, the cord is blown into the pipe in a floating process using the air flow – all without any great effort.
The option of fitting tubes with a cord at a later date is not only ideal for tube manufacturers and wholesalers, but also an effective method of reducing stock levels.
By fitting the tubes with cord later, even when they are already rolled up, you can reduce your stock quantity and only have one item in the warehouse instead of two. This saves space and results in savings in logistics.
- Blowing a cable pull line into micro or flexible pipes Ø 4 to 20 mm
- Also suitable for cable conduits in rolled condition
- Specially suited for fiber optic technology
- Ideally suitable for shorter distances, e.g. from the distribution box into the house/office
- Usable for installations in residential, commercial and industrial buildings
- Work can be performed by a single person
- Easy operation and handling
- Light and compact
- Quickly ready for use
- Faster cord feeding (500 meters in 30 sec.)
- Excellent accessibility, even in confined spaces
- For use with a standard compressor
- Equipped with safety couplings and overpressure protection
- Fits in any car boot
- Available in two versions: Standard and Plus
Standard equipment:
- 1 x EZ15 Pull Line Blower
- 4 x Rolls of Cable Pull Line ca. 900m, tensile strength 24kg
- 6 x Tube couplings for ø 7, 8, 10, 12, 14 and 16 mm
- 1 x EZ15 compressed air hose (3 m length)
- 1 x Tube nozzle for ducts ID 13 – 20 mm in mini case
- 1 x Rubber protection
- 1 x Box with spare parts
- 1 x T-fitting
- 1 x Instruction manual
Extra with + PLUS Equipment:
- 6 x Line stopper for ø 7, 8, 10, 12, 14 and 16 mm
- 1 x Ball tap
- 10 x Lubriball ø 5 mm
- 10 x Lubriball ø 10 mm
- 10 x Lubriball ø 15 mm
- 10 x Lubriball ø 22 mm
Weight of device: 2.9kg
Weight of device with carry-case: ca. 10kg
Dimensions of carry-case: 60x40x25cm
Compressor output min. 200-300l/min
Maximum pressure: 8 bar / 116psi
EZ15 with +Plus equipment
Cord blowing through microducts with EZ15 Pull Line Blower
Check out in our video the innovative application of the EZ15 Pull Line Blower!
The EZ15 Pull Line Blower from Zeitler was developed for fiber optic applications and can be used effortlessly and efficiently for blowing cord into microducts. The special cord is blown into the duct with up to 1000 m/minute.
Blow the cord through the flexible pipe / corrugated pipe in rolled condition with EZ15 Pull Line Blower
EZ15 Pull Line Blower – the perfect tool for blowing cable pull line into any type of cable conduit. Flexible or corrugated pipes with a diameter of 4 to 20 mm – even in a rolled condition – can be laid with a cord in seconds using the EZ15 device!
FAQ EZ15 Pull Line Blower
Yes, the EZ15 pull line blower can also be used with flexible pipes or corrugated pipes.
The EZ15 cord injection device is not intended for use with occupied pipes.
No, the cord reel is specially made for the container of the appliance.
8 bar air pressure would be ideal. For a compressor with 10 bar, the pressure regulator should be reduced to 8 bar.
For pipes with a diameter of up to 8 mm, approx. 85 liters/min is required; for pipes with a diameter of 8 mm or more, we recommend a capacity of at least 200 liters/min.
The EZ15 pull line blower is suitable for pipes with an internal diameter of Ø 4 to 20 mm.
Yes, this is possible with the use of Lubriballs.
No, a commercially available small compressor is sufficient.
Yes, the EZ15 pull line blower enables a cord to be inserted into a pipe collar.