HomeProductsPull Line BlowersEZ50 Pull Line Blower

EZ50 Pull Line Blower

The Tool of Every Electrician for a Smooth Cable Installation.

The EZ50 Pull Line Blower from Zeitler is the ideal solution for electricians and installers who want to install cables quickly, reliably, and efficiently.

With the EZ50, a pulling line can be easily blown or sucked into standard electrical conduits with an inner diameter of 18 to 50 mm / ¾” to 2″without the need for a compressor.

Especially suitable for installations in residential, commercial, and industrial buildings, this compact device can handle even demanding challenges such as crushed pipes, junction boxes, and sockets.

Thanks to its handy design and easy portability, the EZ50 can be used even in the tightest spaces and fits effortlessly into any car boot.

With a range of several hundred meters and simple operation, the EZ50 Stringing Gun saves valuable time and becomes an indispensable partner for smooth cable installations.

  • Blowing or sucking of cable pull line without compressor
  • For standard electrical conduits Ø 18 to 50 mm / ¾” to 2″
  • Also suitable for flexible or corrugated pipes
  • Ideally suited for installations in residential, commercial and industrial buildings
  • For tube diffusers, junction boxes, sockets, lamp sockets, etc.
  • Great time savings when pulling the cable in
  • Powerful for pulling-in problems, such as crushed tubes
  • Easy operation and handling
  • Light and compact
  • Quickly ready for use
  • Faster line feeding over hundred meters possible
  • Excellent accessibility, even in confined spaces
  • Fits in any car boot
  • Available with 230V/50Hz or 115V/60Hz power source
  • Available in two versions: Standard and Plus

Standard equipment:

  • 1 x EZ50 Pull Line Blower
  • 2 x Rolls of Cable Pull Line ca. 900m, tensile strength 24kg
  • 1 x Suction device
  • 1 x Components Set A for conduits internal ø 18 – 20 mm
  • 1 x Components Set B for conduits internal ø 20 – 26 mm
  • 1 x Special nozzle black, for tube ø 25 to 50 mm / 1″ to 2″
  • 1 x Special Nozzle with 90° angle (ø 12 mm)
  • 3 x Beats round ø 11 mm
  • 3 x Beats round ø 13 mm
  • 3 x Beats round ø 16 mm
  • 1 x Carrying belt
  • 1 x Instruction manual

Extra with + PLUS Equipment:

  • 1 x Roll of Cable Pull Line ca. 900m, tensile strength 24kg
  • 1 x Spray nozzle
  • 1 x Parachute for conduits ø 30 to 60 mm / 1″ to 2 ½”
  • 1 x Shuttle complete set (dimension free of choice from ø 20-50 mm / ¾”-2″)
  • 1 x Box with Shuttle assembly material

Weight of device: 4 kg

Weight of device with carry-case: ca. 10kg

Dimensions of carry-case: 60x40x25cm

Generator output: min. 2000 W

Maximum air flow rate: Blowing/suction mode 4 m³/min

Thermal safety switch / Overheat protection

Protection class: IP20

EZ50 with +Plus equipment

In addition, thanks to the additional accessories, the EZ50 Pull Line Blower in the +Plus version makes it possible to lay with cord and clean even heavily kinked or blocked pipes in a single operation.

Video presentation with EZ50 Pull Line Blower

Application of the EZ50 Pull Line Blower

Discover in our video how to use the EZ50 Pull Line Blower in practice!
See yourself how effortlessly and efficiently the EZ50 device is used to blow or suck special cord into pipes and electrical sockets.
Find out more about the versatile applications of the EZ50 Pull Line Blower!

Zeitler AG – EZ50 Pull Line Blower in Action!

Watch the video now and discover the power of the EZ50 Pull Line Blower!

Experience yourself how the EZ50 Pull Line Blower can optimize your installation processes and gain valuable insights into its functionality and benefits.

FAQ EZ50 Pull Line Blower

Is the EZ50 Pull Line Blower suitable for flexible pipes / corrugated pipes?

Yes, the EZ50 Pull Line Blower can also be used with flexible pipes or corrugated pipes.

Is the EZ50 cord injection device suitable for cleaning pipes?

Yes, it is provided with the application of the shuttle.

Can the cable pull cord be reused with the EZ50 pull line blower?

No, the cord reel is specially made for the container of the appliance.

Can the EZ50 pull line blower also be used with occupied pipes?

The EZ50 pull line blower is not intended for use with occupied pipes.

Is the EZ50 cord injection device suitable for water ejection and calibration?

The EZ50 pull line blower enables the pipes to be cleaned, water to be ejected, calibrated and cords to be blow in in a single operation using the injection shuttle.

For which pipe dimensions can the EZ50 pull line blower be used?

The EZ50 pull line blower is suitable for pipes with an internal diameter of Ø 18 to 50 mm.

Is the EZ50 pull line blower suitable for pipes in rolled condition?

No, the EZ50 pull line blower is not suitable for this application.
For pipe in rolled condition, we recommend the EZ15 pull line blower.